How To Receive A Call - NetComm LIBERTY SERIES User Manual

Note: VoIP calls originating from your connected analogue telephone will appear to callers as originating from this assigned number (Caller ID) if not
configured otherwise.
3. Have you registered your VoIP account in the router's setting?
Note: As all Voice Service Providers use different settings, please refer to the Online User Manual for details on how to configure VoIP on your 3G18WV.
4. Is your router powered on?
5. Do you have your telephone connected (via a telephone cable) to the Line port
on the rear of the 3G18WV?
6. Is the phone LED
your handset?

How to receive a call:

When an incoming call is received, the phone LED
phone connected to the 3G18WV will ring.
For more detail on how to configure VoIP and other router settings, please refer to
the Online User Manual, which can be downloaded in PDF format from the website:
http://www.netcomm.com.au/3G18WV
Note: Please refer to your VoIP service provider for required settings and activation of your VoIP phone service and information about the call charges
that apply. For assistance with the operation of your telephone handset, please refer to the documentation provided by the manufacturer of your
analogue telephone.
light on and can you hear a dial tone when you pick up
will start flashing and the