Chapter 11
Basic Switch Configuration
In order to...
Display the commands available at
your current location in the CLI
hierarchy
System Parameter Configuration
Identifying the system
In order to make a P460 switch easier to identify, you can define a name for the
switch, contact information for the switch technician and the location of the switch
in the organization.
In order to...
Configure the system name.
Configure the system contact
person
Configure the system location
Operating parameters
You can use the following commands to configure and display the mode of
operation for the switch and display key parameters.
In order to...
Configure the basic mode of
operation to either Layer 2 or
Routing
Display the mode of operation
Display system parameters
Display module parameters
64
Use the following command...
tree
Use the following command...
set system name
set system contact
set system location
Use the following command...
set device-mode
show device-mode
show system
show module
Avaya P460 Installation and Maintenance Guide