Table of Contents
Advertisement
Chapter 3
Avaya P460 Chassis and Module Installation
Supervisor Module Installation
If you purchased an Avaya P460ML-CFG (Material code 700255003, PEC Code
4548-009), then one Supervisor Module, PSU and the Fan Module are already
installed.
Figure 3.8 shows the positions of the SPV Supervisor installed in the P460 chassis.
Figure 3.8
You can install Supervisor modules in the top two slots – 1 and 2 – only.
Caution: Do not leave any slots open. Use the the blanking plates supplied to cover
empty slots.
Caution: The Supervisor modules contain components that are sensitive to static
discharge. Handle the module by the edges only.
Use appropriate anti-static equipment when handling the modules.
14
Location of the Avaya P460 Supervisor Modules
Avaya P460 Installation and Maintenance Guide
Advertisement
Table of Contents
