Redundant Outband Connections; Figure 7.3 Redundant Outband Connections - Avaya P460 Installation And Maintenance Manual

Redundant Outband Connections

You can create a redundant outband management connection by connecting both
Supervisor modules to the NMS via the Fast Ethernet interface by a switch (see
Figure 7.3).
Figure 7.3
Switch
In this configuration, the Active SPV will respond to its Out-band port and the port
of the other SPV will be ignored.
Avaya P460 Installation and Maintenance Guide
Redundant Outband Connections
Workstation
Chapter 7 Establishing Switch Access
45