Canon LASER CLASS 700 Series Network Manual page 52

❑
When the [Windows NT Setup] dialog box appears, insert the Windows NT
setup disk or specify the location of the necessary files NT needs to copy ➞
click [Continue].
After the files have been copied, the [Network] dialog box opens.
❑
Click [Close].
❑
When asked if you want to restart your computer, click [Yes].
NOTE
You must restart Windows NT for the changes to take affect.
3
Install the printer driver. (See Chapter 1, "Before You Start
Using This Machine," in the PCL Driver Guide.)
When the dialog box for selecting printer management appears, select [My
Computer]. Do not select [Network printer server].
The port selection can be changed after installation. You can select any port,
such as [LPT1].
4
Open the printer's Properties dialog box.
❑
On the taskbar, click [Start] ➞ point to [Settings] ➞ click [Printers].
❑
Right click the printer icon of the printer you installed in step 3.
❑
On the pop-up menu, click [Properties].
Setting Up a Computer for Printing
2
2-33