Specifying Print Service Settings Using Netspot; Setup Using Netware Administrator Or Pconsole; Using Netware Administrator In The Nds Queue Server Mode Or Remote Printer Mode (Netware 4.X Or Later) - Canon LASER CLASS 700 Series Network Manual

■
Queue Server Mode and Remote Printer Mode
This machine supports both the Queue Server mode and Remote Printer mode.
When the machine is used in the Queue Server mode, all print server functions are
provided by the machine itself; no other print server hardware or software is needed.
However, a separate NetWare user's operating license is required for each machine. In
the NDS Queue Server mode (NDS PServer), the NDS print server is used for printing. In
the Bindery Queue Server mode (Bindery PServer), the Bindery print server is used for
printing.
When the machine is used in the Remote Printer mode, a NetWare print server is required
to control the printer. The machine prints using the NDS print server in the NDS Remote
Printer mode (NPrinter), and uses the Bindery print server in the Bindery Remote Printer
mode (RPrinter).
3

Specifying Print Service Settings Using NetSpot

You can install NetSpot from the CD-ROM provided with the optional Network Kit III,
and use it to specify the print service and protocol settings on the computer you are
using.
For instructions on how to install NetSpot and how to specify the print service and
protocol settings using NetSpot, see the NetSpot Quick Start Guide.
NOTE
The NetSpot Quick Start Guide is an online manual included on the accompanying
CD-ROM provided with the optional Network Kit III. You can use Adobe Acrobat Reader
to display and printout the guide for your convenience.

Setup Using NetWare Administrator or PCONSOLE

Instead of using NetSpot, you can use NetWare Administrator or PCONSOLE to
specify the NetWare print service settings.
Using NetWare Administrator in the NDS Queue Server Mode or
Remote Printer Mode (NetWare 4.x or Later)
1
2
3-4 NetWare Print Service Settings
Log on to NetWare as the Administrator (or equivalent access)
➞ start NetWare Administrator.
Execute Quick Setup.
❑
Select the container for the printer you want to create ➞ on the [Tools] menu,
click [Print Services Quick Setup].