Setting The Domain Name - Canon LASER CLASS 700 Series Network Manual

4
Set
5
Set
2
6
1 2 3
4 5 6
7 8 9
0
Set

Setting the Domain Name

Follow the procedure below to specify the domain name of your machine.
NOTE
It is much easier to enter the domain name from the Remote UI. (See "Using a Web
Browser (Remote UI)," on p. 2-14.)
1
2-10 Specifying Protocol Settings
Press [▼] or [▲] until <4.NETWORK SETTINGS> appears ➞
press [Set].
Press [▼] or [▲] until <7.HOST NAME> appears ➞ press [Set].
Enter the host name using the numeric keys ➞ press [Set].
Press to change the entry mode according to the characters you need to
enter. For more information on entering characters, see Chapter 2, "Getting
Started," in the Reference Guide.
Example: hostname
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
NOTE
You cannot enter any symbols, except for a "-" (hyphen) for the host name.
Open all three one-touch speed dialing panels.
➞
➞
➞