Overview Of Network Setting Items; Using The Operation Panel; Using Netspot, Remote Ui, Or Ftp Client - Canon LASER CLASS 700 Series Network Manual

Overview of Network Setting Items

This section provides an overview of the various network setting items if you use
the operation panel, NetSpot, Remote UI, and FTP Client.

Using the Operation Panel

You can change the settings of the machine from the operation panel. Below is a
brief overview of the network settings.
■ System Settings
Network Settings
IP Address Auto
IP Address
Subnet Mask
Default Gateway
DNS Server Add.
DNS Dynamic Set
Host Name
Domain Name

Using NetSpot, Remote UI, or FTP Client

You can change the settings of the machine using NetSpot, the Remote UI, or an
FTP Client. The setting items you can change are shown below.
NOTE
•
The information in parenthesis in the table below is specific to the FTP client. (Example:
"Device Name (DEVICE_NAME)" is displayed as the Device Name for NetSpot and
Remote UI programs. "DEVICE_NAME" is displayed for the config file of the FTP client.)
•
Items with an asterisk cannot be set using NetSpot. Set them using the operation panel
on the machine or the Remote UI.
Item Setting Description
FIXED, AUTO (DHCP,
BOOTP, RARP: On, Off)
IP address
IP address
IP address
IP address
On, Off
Enter the host name of the
machine
Enter the domain name of
your network
DefaultSetting
FIXED
192.168.0.215
0.0.0.0
0.0.0.0
0.0.0.0
OFF
(null)
(null)

Overview of Network Setting Items

5
5-7