Canon LASER CLASS 700 Series Network Manual page 40

3
Enter "root" as the user name.
● If a password has been set for the machine:
❑
Enter the password for the machine ➞ press [ENTER] on the keyboard.
● If no password has been set:
❑
Press [ENTER] on the keyboard without entering a password.
NOTE
•
You can log on using a user name other than "root" (blank, etc.). However, you can
only view the config file, but cannot overwrite it.
•
You cannot log on as "Anonymous."
4
Execute the following command to download the config
(configuration) file.
get config
5
Edit the downloaded config file using Notepad (or similar
program).
For an explanation of each item, see "Overview of Network Setting Items," on p.
5-7.
6
Execute the following command to upload the config file.
put config CONFIG
7
To confirm the settings, execute the following command to
reset the print server.
get reset
You can also confirm that the settings are valid by restarting the machine.
The protocol settings are complete.
Specifying Protocol Settings
2
2-21