Runco RS-1100 CineWide Owner's Operating Manual page 61

Select Color from the Adjustment menu and press ENTER. While looking at the color bar
pattern through a blue filter, adjust the color saturation level until the outermost (gray and
blue) color bars appear to be a single shade of blue:
Tint: Tint or "hue" is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image
appears greener. To set the tint, select Tint from the Adjustment menu and press ENTER.
While looking at the color bar pattern through a blue filter, adjust the tint level until the cyan
and magenta color bars (on either side of the green bar) appear to be a single shade of
blue.
Like the brightness and contrast controls, the color and tint controls
Note
are interactive. A change to one may require a subtle change to the
other in order to achieve the optimum setting.
Runco RS-1100 Series Owner's Operating Manual 49
Operation