Runco RS-1100 CineWide Owner's Operating Manual page 20

Controls and Functions
3. COMP 1 (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.
For best results, do not run your DVD player in progressive mode.
Tip
4. COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, laser disc player or other
composite video source.
5. S-VIDEO
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
6. POWER INPUT (100 to 240 VAC)
Connect the RS-1100 to power here.
7. MAIN POWER SWITCH
Disconnects or applies power to the RS-1100.
8. RS-232 CONTROL PORT
A female, RJ-11 connector for interfacing with a PC or home theater
automation/control system.
9. 12-VOLT (250 mA) TRIGGER OUTPUT (3.5-mm, mini phono jack)
Connection for a 12-volt trigger-controlled device. This can be a retractable screen,
screen mask or the Runco CineWide with AutoScope system.
10. COMP 2 / RGB
Five, BNC connectors for connecting either RGB or component (YPbPr)
high-definition signal sources. (The RS-1100 automatically detects the signal format.)
8 Runco RS-1100 Series Owner's Operating Manual