Avaya 4600 Series Installation Manual page 42

Local Administrative Options
9. Press the # button to continue the procedure without changing the displayed status of
802.1Q
The following text displays left-justified at the top of the display:
VLAN ID=dddd
New=_
where dddd is the value of the 802.1 VLAN ID.
10. Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID.
The following message displays:
VLAN test=ddd
New=_
where ddd is the value of the DHCPOFFER wait period.
11. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The following message displays:
Save new
values?
*=no #=yes
12. Press the # button to save the new values you entered.
The following message displays:
New values
being saved
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the TFTP server after you enter static addressing
information, you must reenter your static addressing information.
42 4600 Series IP Telephone Release 2.2 Installation Guide