MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box
1.00 [25MM] TYP
7.91 [201MM]
FIG. 10
MVP-WDS Wall Mount cutout dimensions using expansion clips
5. Carefully insert the main unit (with expansion clips) into the cutout so that the Mounting Tabs on
the MVP-WDS lie flush against the wall.
#6-32 Faceplate
Security Screws (2)
Die Cut Foam
covers (2)
FIG. 11
MVP-WDS installation configuration for drywall surfaces
10
2X .52 [13MM]
R.13 [3MM] TYP
2X .22 [5MM]
Install the four
included drywall clip sets
at these locations
A - Faceplate
12.70 [323MM] BEZEL OUTLINE
11.06 [281MM]
.25 [6MM] TYP
FRONT BEZEL OUTLINE
THESE NOTCHES ARE ONLY NEEDED IF UNIT IS INSTALLED USING
DRYWALL EXPANSION CLIPS (4 PROVIDED)
4X R.13 [3MM] MAX RADIUS IN CORNERS
CUTOUT
Four notches are required
to accommodate the four
expansion clips (included)
B - MVP-WDS (Main unit)
MVP-WDS Wall Docking Station for MVP Panels
8.63 [219MM]
BEZEL OUTLINE
Mounting Tab