Faceplate Connectors
FIG. 7
Faceplate securing latch and connector locations
8. Press down on the Security Latch to allow it to go through the top opening.
9. Grasp the top rim of the faceplate and carefully slide it over the cradle (at an angle) until the
faceplate is completely removed from the WDS (FIG. 8).
Faceplate securing latches
FIG. 8
Faceplate removal from MVP-WDS
Once the faceplate has been removed, you can continue the installation of the WDS.
MVP-WDS Wall Docking Station for MVP Panels
MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box
Faceplate Securing Latches
Faceplate
7