Mvp-Wds Docking Station Connector Locations; Led Indicators - AMX MVP-7500 Operation/Reference Manual

MVP-WDS Specifications (Cont.)
Other AMX Equipment:

MVP-WDS docking station connector locations

FIG. 2 shows the layout of the connectors on the right side of the MVP-WDS.
Keyboard/Mouse
USB Connectors
FIG. 2 Connector layout on the side of the MVP-WDS

LED Indicators

The two LEDs located within the security release pushbutton on the front panel (FIG. 1) indicate battery
and communication status:
LED Pattern Indicators for the MVP-WDS
LED
Solid Bright
Flashing Bright
(Slow)
Flashing Bright
(Fast)
Solid Dim
MVP-WDS Wall Docking Station for MVP Panels
• CB-MVPWDS Conduit Box (FG037-10)
• MVP-WDS-SK Silver Conversion Kit for MVP-WDS (FG5965-22):
- One Silver Cradle Bezel/Faceplate (60-5965-20SL)
- One Silver Cradle Pivot (60-5965-21SL)
- One Silver Battery Cover (60-5965-22SL)
- One securing rare earth magnet (63-5965-02)
- One securing magnet cup (63-5965-03)
- One #4-20 Magnet Securing screw (80-0193-01)
- Two plastic Die Cut Foam covers (60-5965-47)
WALL
12VDC
KEYBOARD/
MOUSE
The left LED indicates activity and status for the batteries in the MVP panel and in the MVP-
WDS.
The right LED indicates the docking and communication status of the docked MVP panel.
Left - Battery Status
WDS only
WDS batteries are fully
charged
WDS batteries are charging
N/A
WDS receiving power but con-
tains no batteries in cradle
MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box
PWR connector
PWR
MVP in Cradle
MVP batteries are fully
charged
MVP batteries are
charging
N/A
No batteries within the
MVP
Right - Comm. Status
MVP panel is docked and
communicating
N/A
MVP panel is docked but not
communicating
MVP panel is NOT docked
and NOT communicating
3