QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
NOTE:
NOTE:
NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE:
NOTE:
NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE:
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE:
NOTE:
NOTE:
Step 1: Base Configuration (choose one of the following configurable models)
Step 1: Base Configuration (choose one of the following configurable models)
Step 1: Base Configuration (choose one of the following configurable models)
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
HP Models
HP Models
HP Models
Step 2: Choose Required Options (only one of the following from each list unless otherwise
Step 2: Choose Required Options (only one of the following from each list unless otherwise
Step 2: Choose Required Options (only one of the following from each list unless otherwise
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
noted)
noted)
noted)
HP Processors
HP Processors
HP Processors
HP Processors
HP ProLiant DL385 G7 SFF Configure-to-order Server
Factory Integrated Model ships with:
Factory Integrated Model ships with:
Factory Integrated Model ships with:
Factory Integrated Model ships with:
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total)
HP Smart Array P410i/Zero Memory Controller
PCI-Express Riser Cage
One IEC Power cord
Hot plug fans (fully redundant)
NOTE: 4 fans one processor models; 6 fans two processor models
NOTE:
NOTE:
NOTE:
Rack (2U), (3.5-inch)
HP ProLiant DL385 G7 LFF Configure-to-order Server
Factory Integrated Model ships with:
Factory Integrated Model ships with:
Factory Integrated Model ships with:
Factory Integrated Model ships with:
(6) LFF Serial Attached SCSI (SAS) Drive Bays
NOTE: LFF configuration does not support internal optical drive
NOTE:
NOTE:
NOTE:
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total)
HP Smart Array P410i/Zero Memory Controller
PCI-Express Riser Cage
One IEC Power cord
Hot plug fans (fully redundant)
NOTE:
NOTE: (4 fans one processor models; 6 fans two processor models)
NOTE:
NOTE:
Rack (2U), (3.5-inch)
NOTE: This option removes the optical media bay and 8 SFF drive bays
NOTE:
NOTE:
NOTE:
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
NOTE:
NOTE:
NOTE:
Sixteen-Core Processors
Sixteen-Core Processors
Sixteen-Core Processors
Sixteen-Core Processors
HP DL385 G7 AMD Opteron™ 6282SE (2.60GHz/16-core/16MB/140W) FIO
Processor Kit
HP DL385 G7 AMD Opteron™ 6276 (2.30GHz/16-core/16MB/115W) FIO
Processor Kit
HP DL385 G7 AMD Opteron™ 6274 (2.20GHz/16-core/16MB/115W) FIO
Processor Kit
HP DL385 G7 AMD Opteron™ 6272 (2.10GHz/16-core/16MB/115W) FIO
Processor Kit
HP DL385 G7 AMD Opteron™ 6262HE (1.60GHz/16-core/16MB/85W) FIO
Processor Kit
Twelve-Core Processors
Twelve-Core Processors
Twelve-Core Processors
Twelve-Core Processors
DA - 13594
Worldwide — Version 36 — February 13, 2012
HP ProLiant DL385 Generation 7 (G7)
HP ProLiant DL385 Generation 7 (G7)
HP ProLiant DL385 Generation 7 (G7)
HP ProLiant DL385 Generation 7 (G7)
573122-B21
573123-B21
654868-L21
654862-L21
654870-L21
654864-L21
654866-L21
Page 19
Need help?
Do you have a question about the ProLiant DL385 and is the answer not in the manual?