Toshiba e-STUDIO160 Service Handbook page 97

16. Tighten the screw (A) while holding the plate
so that the place will not be dislodged.
Note: With the fuser reliably mounted, the collar
of the main drive gear assembly should
turn with a slight load when it is turned.
December 2002 TOSHIBA TEC
Plate
Screw (A)
Fig. 1-9-12
Main drive gear assembly
Fig. 1-9-13
1 - 89 e-STUDIO160/200/250 ADJUSTMENT ITEMS
11
Collar
12