Toshiba e-STUDIO160 Service Handbook page 173

CC8 Front jogging motor is abnormal
Is the front jogging plate home position sensor working properly?
NO
Replace the sensor.
YES
Is the wiring between the finisher controller PWA and front jogging motor correct?
NO
Correct the wiring.
YES
Has the rack run over the stopper of the roll?
YES
Fix it.
NO
Is the problem solved by replacing the front jogging motor?
NO
Replace the finisher controller PWA.
YES
END
December 2002 TOSHIBA TEC 4 - 51 e-STUDIO160/200/250 TROUBLESHOOTING