Toshiba e-STUDIO160 Service Handbook page 217

(2) Select download data by pressing the [↑] or [↓] key on the PC and press the [Enter] key.
Notes: • The relations between the menu and the data to be downloaded are as follows:
1. Start PC Recovery (Main) → The main data only is downloaded.
2. Start PC Recovery (Scanner Unit) → The scanner data only is downloaded.
3. Start PC Recovery (Main + Scanner Unit)
• If 60 seconds elapse without performing any operation after the download menu is displayed,
"1. Start PC recovery (Main)" will be selected automatically.
The necessary files are copied to the temporary area in the PC from Disk 1.
When copying is completed, the following screen appears.
e-STUDIO160/200/250 UPDATING THE FIRMWARE
→ Both the main data and scanner data are downloaded.
(The main data is downloaded, followed by the scanner data.)
5 - 14
05-03-017
05-03-018
December 2002 TOSHIBA TEC