Copy Image Dimension Adjustment - Toshiba e-STUDIO160 Service Handbook

1.4 Copy Image Dimension Adjustment

As for the print image adjustment, the adjustment items are listed below.
The adjustment should be performed in the following order.
Adjustment item
(1) Aligning value
(2) Printer unit adjustment 1
a) Primary scanning reproduction ratio
Polygonal motor 600 dpi
b) Primary scanning position
Laser starting position 600 dpi
c) Secondary scanning reproduction ratio
Main motor speed fine adjustment
d) Secondary scanning position
Registration
(3) Scanner unit adjustment
a) Primary scanning position
CCD primary scanning deviation
b) Secondary scanning reproduction ratio
Scanner secondary scanning reproduction ratio
c) Secondary scanning position
Scanner secondary scanning deviation
d) Top margin
e) Left margin
f) Right margin
g) Bottom margin
e-STUDIO160/200/250 ADJUSTMENT ITEMS
(450) - (453) (455) - (458) (463) (465)
(410) (417) (418) (419) (497)
(440) (441) - (445)
1 - 54
Code
(400)
(421)
(306)
(304)
(305)
(430)
(431)
(432)
(433)
December 2002 TOSHIBA TEC