Toshiba e-STUDIO160 Service Handbook page 72

d) Top margin
(1) While the original cover remains open, make an A4/LT 100% copy.
(2) To establish a 3.0 ± 1.0 mm blank space on the leading edge of the copy, adjust using the following
procedure.
0 5
4 3
Power ON
(Code)
Notes: 1. An increase in the value corresponds to an increase in the blank image (0.7 mm/step).
2. Adjustment value is able to be input within the range of 0 - 30.
The default adjustment value is 0.
e) Left margin
(1) While the original cover remains open, make an A4/LT 100% copy.
(2) To establish a 2.0 ± 0.5 mm blank space on the left side of the copy, adjust using the following
procedure.
0 5
4 3
Power ON
(Code)
Notes: 1. An increase in the value corresponds to an increase in the blank image (0.1 mm/step).
2. Adjustment value is able to be input within the range of 0 - 255.
The default adjustment value is 0.
e-STUDIO160/200/250 ADJUSTMENT ITEMS
Copy movement direction
0
SET Digital Keys
or
(Set the value)
START
Copy movement direction
1
SET Digital Keys
or
(Set the value)
START
3.0 ± 1.0 mm
SET INT START
or
(Test copy)
START
2.0 ± 0.5 mm
SET INT START
or
(Test copy)
START
1 - 64
01-04-11
INT Power OFF
01-04-13
INT Power OFF
December 2002 TOSHIBA TEC