IBM System x3755 M3 7164 Installation And User Manual page 96

v Date and Time
v Start Options
v Boot Manager
v System Event Logs
v User Security
v Save Settings
78
IBM System x3755 M3 Type 7164: Installation and User's Guide
Select this choice to set the date and time in the server, in 24-hour format
(hour:minute:second).
This choice is on the full Setup utility menu only.
Select this choice to view the startup sequence or boot to devices. The servers
starts from the first boot record that it finds.
This choice is on the full Setup utility menu only.
Select this choice to view, add, or change the device boot priority, boot from a
file, select a one-time boot, or reset the boot order to the default setting.
Select this choice to view the system-event log and the POST event log.
Important:: If the system-error LED on the front of the server is lit but there are
no other error indications, clear the system-event log. Also, after you complete a
repair or correct an error, clear the system-event log to turn off the system-error
LED on the front of the server.
– POST Event Viewer
Select this choice to enter the POST event viewer to view the error messages
in the POST event log.
– System Event Log
Select this choice to view the error messages in the system-event log.
– Clear System Event Log
Select this choice to clear the system-event log.
Select this choice to set, change, or clear passwords. For information about
passwords, see "Passwords" on page 79.
This choice is on the full and limited Setup utility menu.
– Set Power-on Password
Select this choice to set or change a power-on password. For more
information, see "Power-on password" on page 79.
– Clear Power-on Password
Select this choice to clear a power-on password.
– Set Admin Password
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Setup utility menu. If an administrator password is set,
the full Setup utility menu is available only if you type the administrator
password at the password prompt. For more information, see "Administrator
password" on page 80.
Attention: If you set an administrator password and then forget it, there is
no way to change, override, or remove it. You must replace the system board.
– Clear Admin Password
Select this choice to clear an administrator password. For more information,
see "Administrator password" on page 80.
Select this choice to save the changes that you have made in the settings.