Installing A Pci Adapter - IBM System x3755 M3 7164 Installation And User Manual

6. Remove the PCI riser-card assembly (see "Removing the PCI riser-card
7. Grasp the air baffle and disengage it from the slots; then, lift the air baffle to

Installing a PCI adapter

The following notes describe the types of adapters that the server supports and
other information that you must consider when you install an adapter:
v To confirm that the server supports the adapter that you are installing, see
v Locate the documentation that comes with the adapter and follow those
40
IBM System x3755 M3 Type 7164: Installation and User's Guide
Power-supply cage
assembly" on page 38).
remove it from the server.
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.
instructions in addition to the instructions in this section. If you must change the
switch setting or jumper settings on the adapter, follow the instructions that come
with the adapter.