Removing The Air Baffle - IBM System x3755 M3 7164 Installation And User Manual

Removing the air baffle

To remove the air baffle, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Turn off the server and all attached peripheral devices. Disconnect all power
3. Remove the cover (see "Removing the top cover" on page 37).
4. Pull up the handle on the power-supply cage until the handle locks into place.
5. Lift and rotate the power-supply cage toward the front of the server; then, align
on page 28.
cords; then, disconnect all external signal cables from the server.
the nailhead on the handle with the hole on the chassis and lower the handle
until it clicks into place.
Note: The power-supply cage might be heavy, depending on the number of
power supplies that are installed. Support the power-supply cage with both
hands while you rotate it into position.
Chapter 2. Installing optional devices
39