Star Trac 4500 Owner's Manual page 66

Item Lowest
Value
-
HRCON
HRT
-
22.0
10 REV
CNTIREV 31
2
MINPWM
112 MAX 25
MAXPWM 86
DATE 1.00
Default Highest
Value Value
OFF
-
CNTDN
-
30.7 74.0
31 125
30 55
130 170
230 255
1.98 12.99
Meaning
OFF=HR control disabled.
ON=HR control enabled.
CNT DN=manual countdown heart
rate; POLAR, CONTACT; or
BOTH (Polar and contact).
Inches of running belt travel for 10
flywheel revolution, always
measured in inches. Nominal
values are:
• 1.6" pulley: 27.5
• 1.7" pulley: 29.1
• 1.8" pulley: 30:7
• 2.1" pulley: 35.8
Number of counts for each motor
shaft revolution. Values are:
• RPM sensor at flywheel
notches: 31
• RPM sensor at motor shaft
optical disk: 125
Pulse duty cycle to obtain the
selected MN SPD. Divide MN
PWM by 512 to get % duty cycle.
Pulse duty cycle to obtain 112
maximum speed. Divide 112 MX
by 512 to get % duty cycle.
Pulse duty cycle to obtain the
selected MX Spd. Divide MX
PWM by 512 to get % duty cycle.
Treadmill manufacture date.
(Continued)