Star Trac 4500 Owner's Manual page 29

ATTACHMENT SCREWS
SIDE RAILS
(ONE PER SIDE)
WASHERS
MOUNTING BOLT
5
Remove the last two screws that are on the stub sticking out of the ends of the sdie rails. Next,
remove the mounting bolts and two washers from the lower end ofthe side rails. Slide the side rail
stub into the front rail as shown. Replace two screws per side rail, and tighten loosely.
Install the mounting bolts through the holes in the frame, and screw the bolts into the underside of
the side rails. Then tighten all screws and bolts.