Fitlinxx Id Entry And Operation - Star Trac 4500 Owner's Manual

F,TL,NXX
If your club or fitness center is equipped with FitLinxx and you have been assigned an active ID
number, just follow these steps:
Step Olle: Step on the treadmill and enter your five digit FitLinxx ID number by pressing the
0---9 keypad (not all facilities are FitLinxx equipped, check with facility management
before entering an ID.) Once all five numbers are entered, press ENTER.
Step Two:
If your ID was valid, follow the scrolling instructions of: PRESS PROGRAM ( to
choose one of the preset programs available on the TR4500) or PRESS START
(press the START key for immediate use of the treadmill) or PRESS """ (to
choose a heart rate program). If your ID was invalid, try to enter your FitLinxx ID
again. If after a few attempts, your ID is not accepted, contact a club employee for
assistance.
NOTE: You can pause your workout by pressing the "STOP" key once. Your program will pause
for a maximum of 30 seconds. You can resume the program by pressing the "START" key.
Step Three:
To stop the treadmill, press the "STOP" key twice. The running belt slows to a
stop.
Once you have completed your workout, time, distance and calories will automatically be sent to
the onsite FitLinxx management system for review by a qualified instructor or trainer.
TREADMILL Manual