Brother DPC-8060 Service Manual page 374

[ 2 ] Printing problem
<Print job is not printed>
Make sure the status and configuration of the print server. Check following:
1. Make sure that the machine is powered on, is on-line and ready to print.
2. Print the Machine Settings Page of the machine and check if the settings such as IP address
settings are correct for your network. The problem may be the result of mismatched or duplicate
IP address. Verify that the IP address is correctly loaded into the print server. And make sure
that no other nodes on the network have this IP address.
3. Verify that the print server is on your network as follows:
For Windows
(1) Try pinging the print server from the host operating system command prompt with the
command:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can
take up to two minutes for the print server to load its IP address after setting the IP
address).
(2) If a successful response is received, then proceed to Windows
4.0 Peer-to-Peer print (LPR) troubleshooting, and Windows
Otherwise, proceed to Step 4.
For Macintosh
For Mac OS
(1) From the Apple menu, open the Chooser.
(2) Click the Brother Laser (IP) icon, and make sure that your print server name appears in
the right frame. If it is visible, then the connection is good. Otherwise, go to Step (4).
®
®
®
9.1 to 9.2
®
9-52
®
95/98/Me and Windows NT
2000/XP IPP troubleshooting.
®
Confidential