Brother DPC-8060 Service Manual page 128

(7) Push the Hook of the Sub outer chute (indicated by the arrow 7a), and move the Eject
actuator to the direction of the arrow 7b.
(8) Lift up the Eject actuator to remove.
(9) Remove the Eject actuator spring.
Eject actuator
Assembling Notes
When assembling the Eject actuator spring, ensure that its direction is correct referring
to the figure below.
Eject actuator spring
Eject actuator spring
Rib
9
8
7b
7a
Fig. 5-14
Eject actuator
Fig. 5-15
5-29
Sub outer chute
Hook
Sub outer chute
Confidential