Drive Release Link - Brother DPC-8060 Service Manual

Table of Contents

Advertisement

(2) Remove the bind B M3x10 Taptite screw.
(3) Remove the MP solenoid ASSY, Solenoid release spring P/R and MP solenoid lever.
MP solenoid ASSY
Frame L

5.1.71 Drive Release Link

(1) Lift up the back end of the Drive release cam slightly and remove the Drive release cam
from the Frame L.
(2) Turn the Drive release link to the direction of the arrow 2 until the groove of the Drive
release link is aligned with the guide of the boss as shown in the figure below.
(3) Remove the Drive release cam.
Frame L
Taptite, bind B M3x10
Fig. 5-136
Drive release link
Fig. 5-137
Solenoid release spring P/R
MP solenoid lever
3
1
5-94
Drive release cam
2
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-8460nMfc-8860dnMfc-8870dwDcp-8060Dcp-8065dn

Table of Contents