Brother DPC-8060 Service Manual page 259

(34) Disconnect the connectors of the Thermistor ASSY M and Thermistor ASSY S from the
Relay rear PCB ASSY, and remove the harnesses of these thermistors.
Fuser unit
(35) Remove the cup B M4x16 Taptite screw, and then remove the Fuser unit.
Thermistor ASSY M
Relay rear PCB ASSY
Fig. 6-23
Fig. 6-24
6-14
Thermistor ASSY S
Taptite, cup B M4x16
Fuser unit
Confidential