Main Pcb - Brother DPC-8060 Service Manual

5.1.65 Main PCB

(1) Disconnect the 12 connectors and 7 flat cables from the Main PCB.
DX solenoid connector
(For the models
with the DX only)
Engine PCB connector
Battery connector
(For the model with
the battery only)
FB cover sensor connector
Relay rear (Flat cable)
Relay front (Flat cable)
(2) Remove the four cup S M3x6 Taptite screws and two Screws to remove the Main PCB.
Screws
Taptite, cup S M3x6
CCD module (Flat cable)
Fig. 5-120
Main PCB
2a
2b
FG harness
Fig. 5-121
5-85
NCU connector
(For the models with the NCU only)
Home position connector
LD harness (Flat cable)
Speaker connector
Engine PCB connector
Wireless LAN connector
(For the model with the Wireless
LAN only)
Polygon motor (Flat cable)
LVPS PCB connector
Main motor (Flat cable)
Panel PCB connector
Thermistor connector
HVPS PCB (Flat cable)
LT connector
Confidential