Brother DPC-8060 Service Manual page 31

(4) Recommended paper
Plain paper
Recycled paper
Transparency
Label
* This machine can use recycled paper that meets the DIN 19309 specification.
(5) Moisture content
Moisture content: 4% to 6% by weight
CAUTION
When you are choosing print media, be sure to follow the information given below to prevent
any paper jams, print quality problems or machine damage;
- It is recommended to use long-grained paper for the best print quality. If short-grained
paper is being used, it might be the cause of paper jams.
- Use neutral paper. Do not use acid paper to avoid any damage to the drum unit.
- Avoid using coated paper such as vinyl coated paper.
- Avoid using preprinted or highly textured paper.
- It is recommended to use labels or transparencies which are designed for use in laser
machines.
- Avoid feeding labels with the carrier sheet exposed, or the machine will be damaged.
- Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
- Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the machine.
- When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten
the paper as much as possible.
Different types of paper should not be loaded at the same time in the paper tray to avoid any
paper jams or misfeeds.
Europe
Xerox Premier 80 g/m
Xerox Business 80 g/m
M-real DATACOPY 80 g/m
Xerox Recycled Supreme
3M CG3300
Avery laser label L7163
2 -4
2
Xerox 4200DP 20lb
2
Hammermill Laser Paper 24lb
2
N/A
3M CG 3300
Avery laser label #5160
U.S.A.
Confidential