Kohler COMMAND CV17-745 Service Manual page 195

Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
Metal-Cased
Pulse Fuel Pump
Plastic-Cased
Pulse Fuel Pump
Figure 11-77. Reinstalled Fuel Pump.
2. Install the fuel pump using the two hex. flange
screws. Torque the screws to 2.3 N·m (20 in. lb.).
Figure 11-78. Install Pulse Line.
3. Connect the fuel lines. See Figure 11-79.
Figure 11-79. Installing Fuel Line (Commercial
Mower Shown).
Install Air Cleaner Assembly
Refer to Section 4 for the air cleaner reassembly
procedure.
1. Connect the breather hose and attach the
Figure 11-80. Breather Hose and Separator Details.
2. Position a new gasket and the air cleaner base on
www.mymowerparts.com
breather separator to the valve cover. Position the
hose in the cutout of the blower housing (later
models). See Figure 11-80.
the studs while carefully pulling the loose end of
the rubber breather hose through the base until
properly seated (collars sealed against each side
of the base. See Figure 11-81.
Section 11
Reassembly
11
11.25