Kohler COMMAND CV17-745 Service Manual page 191

Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
Figure 11-72. Connecting Governor Spring to
Governor Lever.
Item Description
1 Bracket, speed control
2 Clamp, cable (some applications)
3 Kill Switch (some applications)
4 Lever, choke (top position)
5 Lever, throttle control (middle)
6 Linkage, choke control
7 Lever, throttle actuator (bottom)
8 Screw, M5x0.8x20
9 Washer, wave
10 Washer, flat (3)
11 Spring, choke return
12 Nut, M5x0.8 lock
Figure 11-74. Throttle/Choke Control Bracket Detail.
Install Throttle and Choke Controls
1. Connect the choke linkage to the carburetor and
2. Install the standard throttle control bracket and the
Figure 11-73. Standard Control Bracket.
www.mymowerparts.com
choke actuator lever.
air cleaner support bracket (if used) to the cylinder
heads using the four hex. flange screws. Torque
the screws to 10.7 N·m (95 in. lb.) into new holes,
or 7.3 N·m (65 in. lb.) into used holes.
Section 11
Reassembly
11
11.21