Kohler COMMAND CV17-745 Service Manual page 149

Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
Figure 9-31. Removing Valve Cover.
Remove Ignition Modules
1. Disconnect the lead(s) from each ignition module.
See Figure 9-32.
Figure 9-32. Disconnect Lead(s) from Ignition
Modules.
2. Rotate the flywheel so the magnet is away from
the modules. See Figure 9-33.
Figure 9-33. Position of Ignition Modules.
3. Remove the mounting screws and ignition
Remove Intake Manifold
SMART-SPARK
™
Module Leads
1. Remove the four hex. flange screws securing the
2. Remove the intake manifold and the intake
3. Leave the wiring harness attached to the
Fixed Timing
Ignition Module
Kill Lead
www.mymowerparts.com
modules. Note the position of the ignition
modules.
intake manifold to the cylinder heads. Note which
screws hold the wiring clamps.
manifold gaskets (aluminum intake manifolds) or
O-Ring (plastic intake manifolds). See Figure
9-34.
manifold.
Section 9
Disassembly
9
9.9