Kohler COMMAND CV17-745 Service Manual page 145

Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
Control Bracket
Figure 9-14. Removing Control Bracket.
Air Cleaner Brackets
(Some Models)
Control Bracket
Figure 9-15. Removing Control Bracket and Air
Cleaner Bracket (Some Models).
2. Disconnect the spring from the governor lever;
note hole locations for reassembly.
3. Remove the choke linkage from the choke
actuator lever and carburetor.
Remove External Governor Controls
1. Loosen the hex. flange nut and remove the
governor lever from the cross shaft. See Figure
9-16. Leave the lever attached to the throttle
linkage.
Governor Lever
Figure 9-16. Removing Governor Lever.
Remove Carburetor
Gasoline may be present in the carburetor and fuel
system. Gasoline is extremely flammable, and its
vapors can explode if ignited. Keep sparks and other
sources of ignition away from the engine.
1. Disconnect the fuel shut-off solenoid lead if so
2. Remove the two carburetor mounting nuts
Figure 9-17. Removing Carburetor Mounting Nuts
(Commercial Mower Base Shown).
3. Remove the carburetor, throttle linkage and
www.mymowerparts.com
WARNING: Explosive Fuel!
equipped.
(commercial mower style air cleaners). See
Figure 9-17.
governor lever as an assembly. See Figure 9-18.
Section 9
Disassembly
9
9.5