Maytag BRAVOS W10201176C Use & Care Manual page 26

Delicate
Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses, or washable
knit fabrics.
Sensor Preset Cycle Settings
Sensor Cycles Load Type
BULKY
Jackets, comforters, pillows
HEAVY DUTY
Heavyweight mixed loads, cottons, jeans
NORMAL
Corduroys, work clothes, sheets
WRINKLE CONTROL
Business casual clothes, permanent press, synthetics
DELICATE
Lingerie, blouses, washable knit fabrics
*Preferred setting
Steam Cycles
Use Steam Cycles to help smooth out wrinkles from dry items, such as clothes that have been
worn or clothes that have been left in the dryer too long. When a Steam Cycle is selected, the
estimated time remaining display shows the actual time remaining in the cycle.
NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free
finish may yield better results than those without.
Use of a fabric softener sheet is not recommended with steam cycles as it may cause
temporary staining on the clothes.
Rapid Refresh Small Load
This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one
to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits, and synthetic
garments. In this cycle, a small amount of water is sprayed into the dryer drum after several
minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief
cool down. The heat level and cycle time are not adjustable.
Custom Refresh
This cycle is best for touching up clothes that have been left in the dryer too long. In this
cycle, a small amount of water is sprayed into the dryer drum after several minutes of
tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool
down. The dry time and temperature can be adjusted for this cycle.
NOTE: Overloading the dryer may not yield the same results.
26
Temperature
Medium
*Temp Level and Time Adjust are selectable only for the Custom Refresh cycle.
Regular*
Medium heat is selectable as an
alternate temperature.
Medium*
Low heat is selectable as an
alternate temperature.
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time
Low*
remaining in your cycle. You can change the actual time in the cycle by pressing TIME
Extra-low heat is selectable as
ADJUST
an alternate temperature.
NOTE: Timed Cycles may also be used with the drying rack. See "Drying Rack Option."
Extra-Low
Timed Dry
Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is
also useful for drying heavyweight and bulky items, such as bedspreads, and work clothes.
Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low
temperature setting. Timed Dry can also be used with the drying rack.
Rapid Dry
Use this cycle for dying small loads that need short drying time.
Steam Preset Cycle Settings
Timed Cycles
Load Type
RAPID REFRESH Small Load
CUSTOM REFRESH
NOTE:The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum
dry time of 40 minutes. Only the Medium and Regular temperature settings can be used
for the Custom Refresh cycle.
Timed Cycles
+ (plus) or – (minus). See "Changing Cycles, Modifiers, and Options."
Timed Preset Cycle Settings
Timed Cycles
Load Type
TIMED DRY
Heavyweight, bulky items, work
clothes
RAPID DRY
Small loads
Default Temperature* Default Time
(Minutes)*
Medium 15
Medium 20
Default Default Time
Temperature (Minutes)
High 40
Regular 23