ABOUT LAMPLINC
LampLinc presents you with an elegant and stylish way to dim and remotely control any lamp or other
plug-in device in your home at the touch of a button. Send commands to LampLinc from an INSTEON
Controller. Or conveniently control other Linked INSTEON devices by using the buttons on the side of
LampLinc. The Load Sensing feature can control Linked INSTEON devices by turning the device on and
off from its built-in switch.
Outlet
Key LampLinc Features
Feature
Installs and Links to other INSTEON devices in
minutes
Controls all standard incandescent lamps and other
plug-in devices up to 300 Watts
Responds to and controls other INSTEON devices as
well as X10 devices
Indicates INSTEON setup mode activity and
operational states with a dual-color Status LED and
beeper
Dims the load up to 32 brightness levels
Changes brightness at 32 Ramp Rates
Load Sensing easily disabled and re-enabled
Communicates simultaneously over both radio
frequency (RF) and the power line
Acts as an access point for INSTEON RF-only devices
Stores setup state in memory so settings aren't lost
during power outages
Two-year warranty
What is Included with LampLinc
•
LampLinc – INSTEON Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin or LampLinc – INSTEON
Plug-In Lamp Dimmer Module, 2-Pin
•
Quick-Start Guide
LampLinc Owner's Manual
Status LED
2457D2 (Dual-Band)
Page 3 of 19
Up button
Down button
Set button
2457D2X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X