FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
NOTE: Prior to installing the seal, apply High Perfor-
mance #2 Molybdenum Disulfide Grease to the seal
outside diameter.
4. Using an appropriate seal installation tool, evenly
press the seal into the cover bore until seated.
CAUTION
Make sure the tool is free of nicks or sharp edges or the
seal will be damaged.
5. Repeat steps 1-4 for the opposite side.
INSTALLING DIFFERENTIAL
1. Align the input flange with the front output flange;
then place the differential into position on the frame
and install the cap screws and nuts. Tighten to 38 ft-
lb.
2. Install the cap screws securing the flange couplers
together and tighten to 20 ft-lb.
102
www.mymowerparts.com
CC901
3. Install the front axles (see Drive Axles in this sec-
tion).
GC060
4. Install the wheels and tighten to 80 ft-lb.
5. Pour 275 ml (9.3 fl oz) of SAE 80W-90 hypoid gear
lubricant into the differential and install the fill plug.
Tighten to 16 ft-lb.
6. Remove the ATV from the support stand.
KC291A
Manual
Table of Contents
AG925
AF610D
AF897D