Display Panel - HP Compaq 6000 Pro Maintenance & Service Manual

Display Panel

Description
Display, 21.5-inch, non-glare, non-ZBD, AUO
Display, 21.5-inch, non-glare, ZBD, AUO
The display panel is secured with 14 screws.
To remove the display panel:
1. Prepare the computer for disassembly (see
2. Remove the small rear cover (see
3. Remove the port cover (see
4.
Remove the stand (see
5.
Remove the drive cover (see
6.
Remove the memory cover (see
7.
Remove the upper rear panel (see
8.
Remove the TV tuner module (see
9.
Remove the small fan (see
10.
Remove the heat sink (see
11. Remove the I/O panel (see
12. Remove the cable connector (see
13. Remove the outer/left panel (see
14. Remove the WLAN module (see
15.
Remove the fan (see
16.
Remove the graphics board (see
17.
Remove the system board shield (see
18.
Remove the system board (see
19.
Remove the 15 screws that secure the display panel. The number of screws per side is as follows:
●
Top: 4 screws
●
Bottom: 5 screws
● Left: 3 screws
● Right: 3 screws
Preparing to Disassemble the Computer on page
Small Rear Cover on page
Port Cover on page
Stand on page 42).
Optical Drive on page
Memory on page
Upper Rear Panel on page
TV Tuner Module on page
Small Fan on page
Heat Sink (Thermal Module) on page
I/O Panel on page
Cable Connector on page
Outer/Left Rear Panel on page
WLAN Module on page
Fan on page 84).
Graphics Board on page
System Board Shield on page
System Board on page
40).
41).
43).
48).
50).
64).
56).
57).
62).
66).
70).
68).
60).
87).
89).
Spare part number
633225-001
633226-001
39).
Display Panel
91