System Board - HP Compaq 6000 Pro Maintenance & Service Manual

System Board

Description
System board
The system board is located on the upper right side of the computer (when viewed from the rear). It is
secured with nine screws.
Figure 7-51
To remove the system board:
1. Prepare the computer for disassembly (see
2.
Remove the small rear cover (see
3.
Remove the port cover (see
4.
Remove the stand (see
5.
Remove the drive cover (see
6.
Remove the memory cover (see
7.
Remove the upper rear panel (see
8.
Remove the TV tuner module (see
9. Remove the small fan (see
10. Remove the heat sink (see
11. Remove the I/O panel (see
12. Remove the cable connector (see
13. Remove the outer/left panel (see
System board location
Port Cover on page
Stand on page
Optical Drive on page
Memory on page
Small Fan on page
Heat Sink (Thermal Module) on page
I/O Panel on page
Outer/Left Rear Panel on page
Preparing to Disassemble the Computer on page
Small Rear Cover on page
41).
42).
43).
48).
Upper Rear Panel on page
TV Tuner Module on page
56).
62).
Cable Connector on page
Spare part number
607818-001
40).
50).
64).
57).
66).
70).
System Board
39).
89