Power Button Board - HP Compaq 6000 Pro Maintenance & Service Manual

Power Button Board

The power button board is located on the bottom left side of the computer. It is secured with three
screws and has two connectors.
Figure 7-36
To remove the power button board:
1.
Prepare the computer for disassembly (see
2.
Remove the small rear cover (see
3. Remove the port cover (see
4.
Remove the stand (see
5. Remove the drive cover (see
6. Remove the memory cover (see
7. Remove the upper rear panel (see
8. Remove the I/O panel (see
9. Remove the outer/left panel (see
10. Remove the tape (1) and three screws (2) that secure the board to the computer.
NOTE:
74 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Power button board location
Port Cover on page
Stand on page
Optical Drive on page
Memory on page
I/O Panel on page
Note the location of the grounding cables for proper replacement.
Preparing to Disassemble the Computer on page
Small Rear Cover on page
41).
42).
43).
48).
Upper Rear Panel on page
62).
Outer/Left Rear Panel on page
40).
50).
70).
39).