Inverter Board - HP Compaq 6000 Pro Maintenance & Service Manual

Inverter Board

Description
Inverter board for use with AUO displays
Inverter board for use with CMO displays
The inverter board is located on the left side of the computer. It is secured with two screws and has
three connectors.
Figure 7-38
To remove the inverter board:
1. Prepare the computer for disassembly (see
2. Remove the small rear cover (see
3. Remove the port cover (see
4. Remove the stand (see
5. Remove the drive cover (see
6. Remove the memory cover (see
7.
Remove the upper rear panel (see
8.
Remove the I/O panel (see
9.
Remove the outer/left panel (see
10. Remove the two screws (1) that secure the board to the computer.
76 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Inverter board location
Small Rear Cover on page
Port Cover on page
Stand on page
Optical Drive on page
Memory on page
I/O Panel on page
Outer/Left Rear Panel on page
Preparing to Disassemble the Computer on page
41).
42).
43).
48).
Upper Rear Panel on page
62).
Spare part number
633227-001
633228-001
40).
50).
70).
39).