Port Cover - HP Compaq 6000 Pro Maintenance & Service Manual

Port Cover

The port cover is located on the rear, bottom of the back of the computer. You must remove it to access
the I/O panel on the back of the computer.
To remove the port cover:
1.
Prepare the computer for disassembly (see
2.
Remove the small rear cover (see
3.
Pull the port cover off the computer.
Figure 7-2
To replace the port cover, reverse the removal procedures.
Small Rear Cover on page
Removing the port cover
Preparing to Disassemble the Computer on page
40).
39).
Port Cover
41