Making N In 1 Copies; Page Layout - Brother DCP-9270CDN Basic User's Manual

Chapter 4

Making N in 1 copies

(page layout)

You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page,
see 2 in 1 ID Copy on page 17.
IMPORTANT
• Please make sure the paper size is set to
Letter, A4, Legal or Folio.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
• (P) means Portrait and (L) means
Landscape.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Page Layout.
Press Page Layout.
e
Press d or c to display Off(1in1),
2in1(P), 2in1(L), 2in1(ID)
4in1(P) or 4in1(L).
Press the button you want.
1
For details about 2in1(ID), see 2 in 1 ID
Copy on page 17.
f
If you do not want to change additional
settings, press Mono Start or Colour
Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step g.
g
After the machine scans the page, press
Yes to scan the next page.
16
h
Put the next page on the scanner glass.
Press Mono Start or Colour Start.
Repeat steps g and h for each page of
4
the layout.
i
After all the pages have been scanned,
press No in step g to finish.
If you are copying from the ADF:
Insert your document face up in the direction
shown below:
 2 in 1 (P)
 2 in 1 (L)
4 in 1 (P)

 4 in 1 (L)
1
,
4