Calibration - Brother DCP-9270CDN Basic User's Manual

c
Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) of the paper tray with
it to remove dust.
d
Wipe the two pick-up rollers (1) inside
the machine to remove dust.
1
e
Put the paper tray back in the machine.
f
Plug the machine's power cord back into
the electrical socket. Turn on the
machine.
80

Calibration

The output density for each colour may vary
depending on the environment the machine is
in such as temperature and humidity.
Calibration helps you to improve the colour
density.
1
a
Press MENU.
b
Press a or b to display Printer.
Press Printer.
c
Press a or b to display Calibration.
Press Calibration.
d
Press Calibrate.
e
The machine will display Calibrate?.
Press Yes to confirm.
f
The machine will display Completed.
g
Press Stop/Exit.
You can reset the calibration parameters
back to those set at the factory.
a
Press MENU.
b
Press a or b to display Printer.
Press Printer.
c
Press a or b to display Calibration.
Press Calibration.
d
Press Reset.
e
The machine will display Reset?.
Press Yes to confirm.
f
The machine will display Completed.
g
Press Stop/Exit.
A