Adjusting Colour (Saturation) - Brother DCP-9270CDN Basic User's Manual

Chapter 4
h
Press Mono Start or Colour Start. The
machine scans the other side of the card
and prints the page.
Note
When 2 in 1 ID Copy is chosen, the
machine sets the quality to Photo and the
contrast to +2.
18

Adjusting Colour (Saturation)

You can change the default setting for colour
saturation.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Color Adjust.
Press Color Adjust.
e
Press Red, Green or Blue.
f
Press d to decrease or c to increase the
colour saturation.
Press OK.
g
Repeat steps e and f if you want to
adjust the next colour. Press
h
If you do not want to change additional
settings, press Mono Start or Colour
Start.
4
.