C4
B1BP2V5D
CHECKING THE VALVE TIMING
[1] Camshaft setting peg
[2] Crankshaft setting peg
IMPERATIVE: Respect the safety and cleanliness requirements.
Checking the timing.
Removing.
Disconnect the battery negative terminal.
Raise and support the vehicle, front wheels hanging.
Remove the front RH wheel and the splash-shield.
A: Pegging on the manual gearbox.
Turn the engine by means of the crankshaft pinion screw, to bring it to the pegging position.
Peg the crankshaft, using tool [2].
Unclip:
- The fuel supply hose from the upper timing cover.
- The fuel vapour re-induction circuit.
224
Engine: RFK
Tools.
: (-).0194.B
: (-).0189.R