Engine - CITROEN 2005 C4-XSARA-XSARA PICASSO BERLINGO Owner's Manual

CHECKING AND SETTING THE VALVE TIMING
B1BP304D
Engines: 9HZ - 9HY
[1] Flywheel setting peg
[2] Camshaft setting peg
[3] Crankshaft setting peg
Checking and setting the timing.
Removing.
Raise and support the vehicle, wheels hanging.
Disconnect the positive and negative terminals of the battery.
Remove:
- The front RH wheel.
- The front RH splash-shield.
- The accessories drive belt (see corresponding operation) .
Uncouple:
- The fuel supply unions (1).
- The air/air heat exchanger inlet and outlet pipes (3).
- The exhaust line (at the flexible pipe) .
Disconnect the connecter at «a».
Remove and move aside the power steering fluid reservoir (6).
Uncouple, plug and move aside the tube (2).
Support the engine with a roller jack equipped with a block.
Remove the engine supports (4) and (5).
253
XSARA PICASSO
Tools.
: (-).0194.C
: (-).0194.B
: (-).0194.A